https://www.nathanbuildsrobots.com/testing daily 0.75 2022-10-22 https://www.nathanbuildsrobots.com/testing/volcano-cht monthly 0.5 2022-10-22 https://www.nathanbuildsrobots.com/testing/large-cht monthly 0.5 2022-10-22 https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/3ea1799a-59bd-4624-8030-9fcea3457638/Screen+Shot+2022-02-13+at+6.40.06+PM.png Test Reports - Large Diameter CHT Testing - Make it stand out Beaded extrusion at 60 mm³/s using a 1.8mm nozzle at 4mm extrusion width, 1.8mm layer height. I wonder how this affects interlayer bonding. It will certainly make parts weaker due to stress concentrations caused by all of the extra notches on the surface. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/9ec942b0-6abf-4278-a153-b015c08d3378/Screen+Shot+2022-02-15+at+10.12.59+AM.png Test Reports - Large Diameter CHT Testing - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/e03ae6a7-0950-40a4-97d0-cd6f83fa01a7/Screen+Shot+2022-02-13+at+6.39.25+PM.png Test Reports - Large Diameter CHT Testing - Make it stand out Smooth extrusion at 30 mm³/s using a 1.8mm nozzle at 4mm extrusion width, 1.8mm layer height https://www.nathanbuildsrobots.com/testing/ender3s1 monthly 0.5 2022-02-11 https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/4e1089ca-834d-4ba3-918c-7e4ed6b4d45c/Screen+Shot+2022-02-10+at+5.50.46+PM.png Test Reports - Ender 3 S1 - Upgrades and Slicer Settings - Make it stand out 3) In the “Printer” Drop-down menu, select “Creality Ender-3 S1” *The objects on the build tray are all printable mods for the Ender 3 Check them out on my Patreon by clicking the image! https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/6d75c7f4-8523-4961-a6f7-bd4dc09d69c6/Screen+Shot+2022-02-10+at+5.52.11+PM.png Test Reports - Ender 3 S1 - Upgrades and Slicer Settings - Make it stand out Save the printer setting using the little save icon to the right of where it says “Creality Ender-3 S1 (modified)“ and make sure to always use the 1.2mm retraction profile from now on! Now you can use all of PrusaSlicer’s great built-in profiles! https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/ee10695a-a07e-44c1-bd53-2bdd475897ef/Screen+Shot+2022-02-10+at+5.51.44+PM.png Test Reports - Ender 3 S1 - Upgrades and Slicer Settings - Make it stand out 5) In the “Printer Settings” tab, go to “Extruder 1” and change the retraction setting to 1.2mm. Note that I have a bunch of extra settings on my screen because I enabled “Expert” mode in the top-right. I had to increase this from the default setting (it was 0.8 at the time of writing), because it resulted in a small amount of stringing on my printer. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/5b8568b5-cf4a-483d-95d0-1f394675d323/Screen+Shot+2022-02-10+at+5.42.33+PM.png Test Reports - Ender 3 S1 - Upgrades and Slicer Settings - Make it stand out 2) Under “Other Vendors“, select “Creality FFF”, and you will see all of the Creality printers. Check the box for “Ender 3 S1” and then click “Finish“ https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/5cef08e4-9301-445c-a950-8c842e1ac696/Screen+Shot+2022-02-10+at+6.02.00+PM.png Test Reports - Ender 3 S1 - Upgrades and Slicer Settings - Make it stand out Ender 3 v2 Cat print is on the left, Ender 3 S1 is on the right. Which do you think looks better? https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/4dba95af-20c3-41c9-9e23-ab544b50c1e3/Screen+Shot+2022-02-02+at+12.54.33+PM.png Test Reports - Ender 3 S1 - Upgrades and Slicer Settings - Make it stand out Test data from my Ender 3 S1 initial review https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1a38d5fa-6273-498b-a791-d0dd6d493238/Screen+Shot+2022-02-06+at+12.00.18+AM.png Test Reports - Ender 3 S1 - Upgrades and Slicer Settings - Make it stand out Test data from my video on Ender 3 S1 CHT and Hotend upgrade. The Stock “Sprite“ extruder holds up very well at high flow rates. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1a83334c-4e71-42e1-99cf-84812841fe3e/Screen+Shot+2022-02-10+at+5.41.45+PM.png Test Reports - Ender 3 S1 - Upgrades and Slicer Settings - Make it stand out 1) Open up the configuration Assistant. This will open automatically the first time you launch PrusaSlicer https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/3ca2b06a-29bc-4999-8a87-49c7bb935448/Screen+Shot+2022-02-10+at+5.51.14+PM.png Test Reports - Ender 3 S1 - Upgrades and Slicer Settings - Make it stand out 4) All of the stock profiles are great. I use “NORMAL” and “SUPERDRAFT” most often. Occasionally I will use a special profile I made for ultimate print speed. I call it “Stupid Fast“. https://www.nathanbuildsrobots.com/testing/ender3v2 monthly 0.5 2022-02-11 https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/541979ca-f6cd-4d0a-bdc9-6fe94d74c87d/Screen+Shot+2022-01-30+at+11.27.44+PM.png Test Reports - Flow Rate Testing of The Ender 3 V2 - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/e79393c6-5a9a-44fe-bcb4-1b5829bafd22/Screen+Shot+2022-01-31+at+9.47.49+AM.png Test Reports - Flow Rate Testing of The Ender 3 V2 - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/ea852d74-8a21-4836-a2cf-34ca10cf600a/Screen+Shot+2022-01-31+at+9.22.12+AM.png Test Reports - Flow Rate Testing of The Ender 3 V2 - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://www.nathanbuildsrobots.com/reviews daily 0.75 2022-01-31 https://www.nathanbuildsrobots.com/reviews/blog-post-title-one-e2w76 monthly 0.5 2020-05-19 https://www.nathanbuildsrobots.com/reviews/blog-post-title-two-t2l2c monthly 0.5 2020-05-19 https://www.nathanbuildsrobots.com/reviews/blog-post-title-three-grmkc monthly 0.5 2020-05-19 https://www.nathanbuildsrobots.com/reviews/blog-post-title-four-48mnk monthly 0.5 2020-05-19 https://www.nathanbuildsrobots.com/blog daily 0.75 2025-02-25 https://www.nathanbuildsrobots.com/blog/modder-board-troubleshooting monthly 0.5 2025-02-25 https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/70261b17-747c-43e9-bb83-317776d3f44a/20250210_131703.JPG Blog - Modder Board Troubleshooting - Make it stand out Picture of a fried transistor that has released it’s magic smoke. Can you tell which one it is? https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/03ccd1dc-4056-487d-ad11-911690361347/rn_image_picker_lib_temp_9d0cc582-81b1-4ea3-bd7f-4431e44e6f77.JPG Blog - Modder Board Troubleshooting - Make it stand out Ender 3 S1 motherboard. AKA: main board, or MCU https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/063fa892-b0d5-4303-ad8a-991decc6e913/image0+2.JPG Blog - Modder Board Troubleshooting - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://www.nathanbuildsrobots.com/blog/can-you-3d-print-with-a-3d-printed-nozzle-featuring-incus-3d-printing monthly 0.5 2024-11-17 https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809785589-10KGZN3CKET10G8FSHXN/NOZZLE+ENTRY.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D - Make it stand out You might notice the nozzle intake is larger than most 3D printer nozzles. I think this is because they designed this nozzle for use with 2.85mm filament, instead of the more common 1.75mm filament that is in widespread usage today. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809720323-12RN41RT0B0P5G19E1F2/nozzle+thru.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D - Make it stand out You can see all the way through the nozzle. It’s printed through and through. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809802116-GDTTA43SB5ZKGD8JCFB7/NOZZLE+TIP+WORSE.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D - Make it stand out The nozzle on the left is manufactured using traditional methods, likely machined on a Swiss Lathe. The nozzle on the right was printed by incus. What is most remarkable is that even the fine details, such as the threads and the 0.4mm nozzle orifice were directly printed with no post-processing. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809826720-JXAOGQ7JTI6ENI1S9491/NOZZLE+ORIFACE.jpeg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/922ad681-abb7-4ef8-b586-826c2a7115b5/Screen+Shot+2024-11-17+at+10.55.55+AM.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D - Make it stand out incus Display Booth at Formnext https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809786538-7K7TEFD02LY8N47U2EDN/NOZZLE+NON+PRINTED+TIP.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D - Make it stand out For reference, this is what a typical machined nozzle looks like. The surface is much smoother. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809681098-KUGNJOROI27VOQM6KMMJ/boatwiderangle.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809682909-0HG9W3JN0RZDJ5Q6C4FJ/double+benchy.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809700270-M3WISZZ2QJGU52UQVSGR/nozlfrontal.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809703265-YBANAVVKNIL6F53603P2/nozzle+2.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809719574-G4BU8B2QH5QQ19191J8R/nozzle+rear.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809720323-12RN41RT0B0P5G19E1F2/nozzle+thru.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809736411-6MXED23OTMLQH73SFHK9/nozzleinboot.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809741757-53V5E7BR8I4UU4E5DD9A/rearonwrench.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809753914-MXQ565VSLKA0GYODOMFC/COIN+EDGE+LESSSSS.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809755323-YBJT0SJ63L8MQD1WYT5H/COIN+EDGE.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809770664-LJOQQCYK3EGB51P4737S/COIN+F11.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809771809-PC4GILYFLQPJYQM06322/MULTIPLE+EXPOSURE.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809785589-10KGZN3CKET10G8FSHXN/NOZZLE+ENTRY.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809786538-7K7TEFD02LY8N47U2EDN/NOZZLE+NON+PRINTED+TIP.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809800355-0L3BISPLHWERXFYDRTAA/NOZZLE+THREADS.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809802116-GDTTA43SB5ZKGD8JCFB7/NOZZLE+TIP+WORSE.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809826720-JXAOGQ7JTI6ENI1S9491/NOZZLE+ORIFACE.jpeg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809827327-051KEHS8Z1TOGP2SBCLZ/wrenchandnozzle.jpeg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809817440-RT2KZEMW8UON3GZJLTUE/NOZZLE+TIP.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809817178-0OPRUI9Z7Q54JLUF0DBW/NOZZLES.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/7fea4df0-e93f-4cd0-af99-0259f75409a8/Screen+Shot+2024-11-17+at+11.08.15+AM.png Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D - Make it stand out Here is an image of the incus nozzle finishing up the last part of the Benchy https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809682909-0HG9W3JN0RZDJ5Q6C4FJ/double+benchy.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D - Make it stand out The Benchy that was printed with the incus 3D Printed Nozzle is on the left. It was printed in 61 minutes. The benchy on the right was printed with a Phaetus nozzle made of nickel coated copper nozzle with a tungsten insert in 41 minutes. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809741757-53V5E7BR8I4UU4E5DD9A/rearonwrench.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D - Make it stand out The only part that I modified was the back surface of the nozzle. When the nozzle is secured to the printer, this back surface provides the seal which prevents filament leakage. I ground the back of the nozzle against a flat piece of high carbon steel to smooth it out. It may have worked fine without this extra smoothing, but it only took a few seconds to do, and helped boost its chances of success. Also, in this picture you can see the fine resolution of the nozzle compared to a part made with a more typical metal 3d printing process. The wrench shown next to the nozzle is likely made with an SLM process. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1731809817440-RT2KZEMW8UON3GZJLTUE/NOZZLE+TIP.jpg Blog - Can You 3D Print With a 3D Printed Nozzle? Featuring Incus 3D - Make it stand out The nozzle tip of the printed nozzle is very rough. But it doesn’t look like it affected print quality very much. https://www.nathanbuildsrobots.com/blog/fiberreinforcedfilaments monthly 0.5 2024-07-25 https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/cc318d4b-e0bb-471e-b6fb-c8830c85dc4c/NBRwatermarkLogoWhite.png Blog - A Deep Look at Fiber Reinforced Filament - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/715c21b4-d11f-4aa2-9177-0d46c66f9357/DC250+Better+Lighting.jpg Blog - A Deep Look at Fiber Reinforced Filament - Make it stand out This is a macro photo of the Extruder Tensioning clamp from a PRUSA MK4 made of PETG-CF. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/db226acd-8929-48ab-9bbd-190468c9d9a5/fibercloseup.jpg Blog - A Deep Look at Fiber Reinforced Filament - Make it stand out This is a close-up of the same 3D Printed part. On the right half of the image you can see the effect of clear-coating has on the surface finish. It becomes glossy and the fibers . https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/c8a3e0f4-f491-4d83-87d3-44f8dd6479ca/P1000358.JPG Blog - A Deep Look at Fiber Reinforced Filament - Make it stand out This closeup of a part made with MultiJet Fusion looks like a static TV screen. The white particles are not fully melted to the part, and can be worked loose with a brush or with packing tape. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1a23f5a8-d4f3-4865-82a3-78cc2cf82926/FILAMENTS.jpg Blog - A Deep Look at Fiber Reinforced Filament - Make it stand out From left to right, we have the 10 samples A through I from the video SAMPLE A (WHITE FIBERS) - GLASS FIBER ABS SAMPLE B (FUZZY, BLACK) - CARBON FIBER NYLON SAMPLE C (FUZZY, GREY) - CARBON FIBER PLA SAMPLE D (SKIN TONE) - WOOD FILL PLA (BIRCH) SAMPLE E (CHARCOAL) - WOOD FILL PLA (EBONY) SAMPLE F (SHINY BLACK) - POLYCARBONATE SAMPLE G (SHINY FLECKS) - GALAXY BLACK PLA SAMPLE H (3 COLORED) - SILK PLA SAMPLE I (JAGGED WHITE) - HIGH FLOW PLA https://www.nathanbuildsrobots.com/blog/introducing-the-prusa-pro-ht90-the-best-desktop-printer-for-engineers monthly 0.5 2024-11-17 https://www.nathanbuildsrobots.com/blog/understanding-delta-kinematics-for-3d-printers monthly 0.5 2024-06-24 https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/2b46e08f-4f02-4827-986c-7482311c2e58/Screen+Shot+2024-06-24+at+12.28.42+PM.png Blog - Understanding Delta Kinematics for 3D Printers - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/d287e2a0-127e-4c82-a725-874f57f9c4d3/Screen+Shot+2024-06-24+at+12.28.04+PM.png Blog - Understanding Delta Kinematics for 3D Printers - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/894df97c-14ce-472a-b9e5-cb632d5a0f00/Screen+Shot+2024-06-24+at+12.28.14+PM.png Blog - Understanding Delta Kinematics for 3D Printers - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/b5bd7753-d33a-4b05-bb1b-e1760aed3426/Screen+Shot+2024-06-24+at+12.26.51+PM.png Blog - Understanding Delta Kinematics for 3D Printers - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://www.nathanbuildsrobots.com/blog/the-history-of-3d-printing-prehistoric monthly 0.5 2024-04-26 https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/c6183bf8-5550-4e55-a2f3-a903467171c0/Screen+Shot+2024-04-26+at+9.53.29+AM.png Blog - The History of 3D Printing: Prehistoric - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://www.nathanbuildsrobots.com/blog/chemcubed monthly 0.5 2023-05-28 https://www.nathanbuildsrobots.com/blog/spee3d monthly 0.5 2024-07-12 https://www.nathanbuildsrobots.com/blog/rapidia monthly 0.5 2023-05-08 https://www.nathanbuildsrobots.com/blog/glassomer monthly 0.5 2023-05-06 https://www.nathanbuildsrobots.com/blog/lsam monthly 0.5 2023-05-06 https://www.nathanbuildsrobots.com/blog/open-source-closed monthly 0.5 2023-04-23 https://www.nathanbuildsrobots.com/home daily 1.0 2022-08-18 https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/8a77e9cb-c954-4e3c-af18-0a531720a3ea/Screen+Shot+2022-01-21+at+3.31.37+AM.png Home https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/e517aee3-be72-4ff9-8d92-a1f4465524ea/Screen+Shot+2022-01-21+at+9.04.09+AM.png Home - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/32a7575c-d8de-48f9-beb1-197ebd80a763/Klemco.jpeg Home - Make it stand out Klemco LLC https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/d8e711fe-b024-4b40-8ff9-07631f10650d/Atomstack.png Home https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/3dfa2eec-593b-4858-9209-3e7b6a3c5cb4/Bondtech-logo-Positive-Square-1200x1200.png Home - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/35742cae-ed0a-41ed-898e-8fdf7f13bc58/Biqu.png Home https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/dc40ff26-1b0a-4ce1-b777-cb4d5bd80e6b/Artillery.jpeg Home https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/db981004-1388-49f7-b14e-e6ee177906fe/voxelab+logo+%281%29.png Home - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/d95751ed-cdae-4b32-bee3-1f38bab0c393/Duramicspool.jpeg Home - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/57e9e378-c323-4232-8006-6aa9ea74abb0/VisionMiner.png Home - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/780c351f-a73d-409b-94dc-03462a9c75c2/Fokoos.jpeg Home - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/d804e2ce-ae6b-4709-abdb-c5d22d6bca65/xometry-logo.png Home - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/2adf6ab7-cba9-49a8-bc13-0810f5a13929/Sainsmart.png Home - Make it stand out SainSmart https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/a504d94f-af98-456d-a887-c2ccd78a0244/Microswiss.png Home - Make it stand out Micro Swiss https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/d236fb2d-db17-434c-af34-dae524b57f57/slice.png Home - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/8237544d-e4de-4786-ad90-b98952412c0a/Tronxy.jpeg Home - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/59e5ed4c-c6b1-4565-80a4-2d357f353c5b/Phaetus.jpeg Home - Make it stand out Phaetus https://www.nathanbuildsrobots.com/our-services daily 0.75 2024-04-23 https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/b551374b-a3ff-4d49-85cb-19ca287d350d/Screen+Shot+2022-01-21+at+9.55.37+AM.png Our Services https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/11cc3fe7-2562-4a19-8103-18ffed6322e1/Screenshot_20220124-235828_TopOpt.jpg Our Services - Make it stand out Whatever it is, the way you tell your story online can make all the difference. https://www.nathanbuildsrobots.com/contact daily 0.75 2023-08-17 https://www.nathanbuildsrobots.com/affiliate-offline daily 0.75 2024-11-16 https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/e1aee708-cf6b-4a6d-89e8-09b22094bad5/Screen+Shot+2024-07-22+at+12.25.34+AM.png https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/447c8cda-4963-4ce2-a2e5-2e5ef5d39130/NOZZLE+TIP+WORSE.jpg https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/d8f1c669-d159-4c8e-a641-0c4524b0a87b/newfilaments.jpg https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/eb836c38-63a4-4006-977b-1d2dc664d8bd/Screen+Shot+2024-11-15+at+9.04.55+AM.png https://www.nathanbuildsrobots.com/projects daily 0.75 2022-12-01 https://www.nathanbuildsrobots.com/projects/ender-3-s1-breakout-board-replacement monthly 0.5 2022-09-24 https://www.nathanbuildsrobots.com/projects/altium monthly 0.5 2022-08-26 https://www.nathanbuildsrobots.com/projects/breakout monthly 0.5 2022-10-14 https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/21150135-413f-4ef9-bdee-eb21289803bf/lwq.JPG https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/47666ebb-c2ea-4db3-825c-23b0ebc42f0a/Screen+Shot+2022-12-01+at+12.16.23+PM.jpg https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/49377f8f-dca0-40a6-b45c-9261f33a2621/Screen+Shot+2022-10-13+at+8.25.33+PM.png https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/38b23cea-b509-4f68-9711-82bb8bc35623/Screen+Shot+2022-10-13+at+8.25.45+PM.png https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/7ee761c9-5d8f-4ecb-816a-3614b93a5990/20221013_195829.jpg https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/e218d509-d730-457d-ba1a-5a8b8c55bee2/Screen+Shot+2022-10-13+at+9.15.37+PM.png https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/caa91ed2-1866-4a22-a645-a50f8dafee1e/Screen+Shot+2022-10-13+at+9.53.18+PM.png https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/1a6deca7-653e-40df-89f0-0c97122bf91f/Screen+Shot+2022-10-13+at+9.18.06+PM.png Projects - Installing The Ender 3 S1 Breakout Board https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/8ec89afc-8d04-432b-b2d1-c6c2b6e5a78f/Screen+Shot+2022-10-13+at+9.17.57+PM.png Projects - Installing The Ender 3 S1 Breakout Board https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/2b848228-2951-4d09-9b0a-0f69b27b936d/Screen+Shot+2022-10-13+at+9.18.14+PM.png Projects - Installing The Ender 3 S1 Breakout Board https://www.nathanbuildsrobots.com/projects/enderupgrade monthly 0.5 2022-01-21 https://www.nathanbuildsrobots.com/projects/rapido monthly 0.5 2022-01-21 https://www.nathanbuildsrobots.com/projects/atomstackp7 monthly 0.5 2022-01-21 https://www.nathanbuildsrobots.com/projects/aquilavsender monthly 0.5 2022-01-21 https://images.squarespace-cdn.com/content/v1/61ea64ef4b391a69c11397be/d93a128b-6b77-4f69-8590-5b6a0146c4cf/Screen+Shot+2022-01-21+at+6.37.08+AM.png Projects - Voxelab Aquila VS Ender 3 V2 - Creality seemed to like the video, which I thought was really nice I don’t know if they were being sarcastic here, but Creality has never reached out for a collaboration, despite me having several very popular videos on the Ender 3 platform. Maybe they put me on a blacklist? Sorry Creality! I really do like your stuff, but you got outplayed and under-cut by Voxelab here. https://www.nathanbuildsrobots.com/projects/xometry-tour monthly 0.5 2022-08-18 https://www.nathanbuildsrobots.com/projects/project-one-f5w4d-lxmxh monthly 0.5 2022-05-31 https://images.squarespace-cdn.com/content/v1/5ec321c2af33de48734cc929/1589847336759-YACMFJPFHUW1OQZJXUUF/20140301_Trade-151_0124-copy.jpg Projects - Project One https://images.squarespace-cdn.com/content/v1/5ec321c2af33de48734cc929/1589847336169-ER4P81V0HWA3SH81W1QR/20140301_Trade-151_0124-copy.jpg Projects - Project One https://images.squarespace-cdn.com/content/v1/5ec321c2af33de48734cc929/1589847334968-DE82MACUOAUSEZT65M3H/20140301_Trade-151_0124-copy.jpg Projects - Project One https://images.squarespace-cdn.com/content/v1/5ec321c2af33de48734cc929/1589847334245-H430ILXV7TTE8OBGPEW8/20140301_Trade-151_0124-copy.jpg Projects - Project One https://images.squarespace-cdn.com/content/v1/5ec321c2af33de48734cc929/1589847333502-CVFRP4WIHRB50F56M888/20140301_Trade-151_0124-copy.jpg Projects - Project One https://images.squarespace-cdn.com/content/v1/5ec321c2af33de48734cc929/1589847332741-UB05QWW31DIDXCV1C06L/20140301_Trade-151_0124-copy.jpg Projects - Project One